No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Web Page Access

Web Page Access

This section describes how to access the phone web page as an administrator.

Web Page Compatiblity

The IP phone web management system supports the operating systems and web browsers listed in Table 6-1.

Table 6-1  Supported operating systems and web browsers



Operating system


Windows7 32-bit

Windows7 64-bit

Windows8 32-bit

Windows8 64-bit

Windows10 32-bit

Windows10 64-bit

Web browser






  1. Obtain the IP address of the IP phone.

  2. Open a web browser and enter the phone's IP address in the address box.

    Ensure that the web browser you are using does not support TLS 1.2.

  3. Enter the administrator account and password, and click Log In.

    The default administrator account is admin, and the default administrator password is admin123. To ensure security, change the administrator password at your first login. For more information, see Admin Password Change.

    If you enter the password incorrectly for three consecutive times, the IP address of the PC or terminal you are using will be denied to access the IP phone. To continue to access the IP phone, you can change the IP address of the PC or terminal (a maximum of ten IP addresses are supported). However, if the IP address has been changed for ten times and is still denied to access the IP phone, the IP phone will be locked, denying any IP address to access it. In this case, to access the IP phone, you need to wait five minutes until the IP phone is unlocked.

Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 46285

Downloads: 1807

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next