No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Automatic Upgrade

Automatic Upgrade

eSpace 8950 supports automatic upgrade at upgrade intervals or upon power-on.


  • The upgrade server is available.
    It is recommended that you use the Apache server (a type of HTTP server) as the upgrade server. For details about how to install and configure an HTTP server, see Using the Apache Server.
  • Upgrade files are available.
    eSpace 8950 has three types of upgrade files:
    • 1 Firmware Upgrade Image (version upgrade file)
    • 2 Config File (configuration file)
    • 5 CA letter File (certificate file)
    For details about how to obtain the files, see Required Data.
  • The UPF file is available. For details, see Preparing a UPF File.
    In the UPF file, retain the code of only files required for phone upgrade.


eSpace 8950 periodically detects whether new upgrade files are available on the server and if there is any, automatically upgrades its version.


  1. Enter the UPF file URL and enable automatic upgrade on the IP phone.

    • For a single IP phone
      • Configure the UPF file URL. Specifically, access the phone web page as an administrator, choose Advanced > Server > Version Download Server > Upgrade Server, and enter the UPF file URL on the page that is displayed. The UPF file URL cannot contain any space and must be in format of http://HTTP server IP address:HTTP server port number/UPF file directory/UPF file name, for example,, and the port number to use depends on actual network environment. The default port number is 80.
      • Enable automatic upgrade. Specifically, on the phone web page, choose Advanced > Upgrade > Automatic Upgrade. On the page that is displayed, select Enable for Automatic Upgrade, select the required value from the Automatic Upgrade Interval drop-down list box, and click Save.
    • For multiple IP phones
      • Set UPFSeverInfo > UPFURL in the configuration file (Config-eSpace8950.xml) to the UPF file URL.
      • Set UpgrdCycInfo > ISAUTOUPG in the configuration file (Config-eSpace8950.xml) to 1.

  2. Save the upgrade files to the root directory of the upgrade server. C:\Program Files\Apache Software Foundation\Apache2.2\htdocs is used as an example.
  3. Each time eSpace 8950 is powered on or when the upgrade interval arrives, eSpace 8950 starts automatic upgrade.
  4. When the message "Upgrade?" is displayed on the phone screen, select Yes.

    If no operation is performed 5s after the message "Upgrade?" is displayed, eSpace 8950 also starts automatic upgrade.

  5. After the upgrade is complete, the message "Upgrade Success" is displayed on the phone screen.
Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 47523

Downloads: 1812

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next