No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Others

Others

Setting Parameters on the Web Page

  1. Access the phone web page as an administrator. For details, see Web Page Access.
  2. Choose Advanced > Others.


    The Others page is displayed, as shown in Figure 6-16.

    Figure 6-16  Others

  3. Set parameters (see Table 6-20 for detailed parameter descriptions).

    Table 6-20  Parameter description

    Parameter

    Description

    How to Set

    How to Modify the Configuration File

    Port Mirroring

    Indicates whether to enable port mirroring. With port mirroring enabled, the data on the phone's LAN port is transparently transmitted to the phone's PC port when the phone's PC port connects to a PC for network access. This facilitates fault locating.

    NOTE:
    Port mirroring allows all phone data to be mirrored, including call service data. It is recommended that port mirroring be disabled. If port mirroring is required for fault locating, it is recommended that data be encrypted using HTTPS, SRTP, or TLS to avoid data leak.

    Enable port mirroring.

    Default: Disable

    Parameter: Enable

    Location: Device > ComCfg > LAN > Mirror

    Value: 0 or 1
    • 0: disable
    • 1: enable

    Example: Enable="1"

    Signal Tone

    Indicates the signal tones, including the ringback tone, busy tone, and dial tone. Different countries may have different signal tones.

    Select the desired country.

    Parameter: Tone

    Location: Device > ComCfg > Signal

    Value range: 0-11, respectively indicating China, Australia, Brazil, France, Germany, UK, Mexico, New Zealand, Spain, USA, others, and default (dial tone being UK's and the other signal tones being China's)

    Example: Tone="0"

    Default: 11

    Import Signal Tone

    Imports a local signal tone file to the IP phone.

    Compress the desired signal tone file to a .tar file, name it signal.tar, and import it to the IP phone.

    -

    Synchronization

    After the synchronization function is enabled, the IP phone automatically synchronizes call records to the server.

    Set this parameter based on requirements.

    -

    USB

    Enables you to configure the availability of the IP phone's USB1 and USB2 interfaces as well as the camera USB interface.

    -

    -

    Wi-Fi and Bluetooth

    Enables you to configure the availability of the IP phone's Wi-Fi and Bluetooth.

    Set this parameter based on requirements.

    -

    SD Card

    Indicates whether to enable the SD card.

    Set this parameter based on requirements.

    Parameter: IsSupport

    Location: Device > ComCfg > SDCard

    Value: 0 or 1

    • 0: disable
    • 1: enable

    Default: 1

    Example: IsSupport="1"

    Log Out

    After the logout function is enabled, you can log out of the IP phone on the phone LCD screen.

    Set this parameter based on requirements.

    -

    802.1x Authentication Using SIP Account

    After it is enabled, the IP phone's SIP account is authenticated using 802.1x.

    Set this parameter based on requirements.

    -

    Application Installation

    Indicates the PC port on the IP phone. This port can connect to a PC for both the IP phone and the PC to access the Internet. Two options are available for this parameter:

    • Enable: The PC port is enabled.
    • Disable: The PC port is disabled.

    Set this parameter based on requirements.

    Parameter: enable

    Location: PCPort

    Value: 0 or 1

    • 0: disable
    • 1: enable

    Default: 1

    Example: enable="1"

    BLF

    Indicates the maximum number of status monitoring numbers.

    Set this parameter based on requirements.

    NOTE:
    For details about how to configure BLF, see the eSpace 8950 IP Phone V200R003C00 User Guide.

    Parameter: Maxnumber

    Location: Device > ComCfg > BLF

    Value: 1-45

    Default: 20

    Example: enable="20"

    HTTPS Authentication

    After it is enabled, the IP phone authenticates the certificate sent from the HPPTS server. The default value is Disable.

    Set this parameter based on requirements.

    Parameter: enable

    Location: Device > ComCfg > HttpsVerifyMode

    Value: 0 or 1

    Default: 0

    Example: enable="0"

    SIP TLS Authentication

    After it is enabled, the IP phone authenticates the certificate sent from the SIP TLS server. The default value is Enable.

    Set this parameter based on requirements.

    Parameter: enable

    Location: Device > ComCfg > TlsVerifyMode

    Value: 0 or 1

    Default: 0

    Example: enable="1"

Setting Parameters on the LCD Screen

  1. Choose Advanced > Others on the LCD screen as an administrator. For details, see Advanced Screen Access.
  2. Set parameters listed in Table 6-21.

    Table 6-21  USB port parameters

    Parameter

    Description

    How to Set

    USB1

    Indicates whether to enable USB port 1.

    Set this parameter based on the site requirements.

    USB2

    Indicates whether to enable USB port 2.

    Set this parameter based on the site requirements.

    Camera USB

    Indicates whether to enable the USB camera port.

    Set this parameter based on the site requirements.

Translation
Download
Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 53086

Downloads: 1840

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next