No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using the Apache Server

Using the Apache Server

This section describes how to set up an Apache server in the Windows XP operating system.

Context

You can obtain the Apache server installation software from http://httpd.apache.org and install the Apache server in default configuration using the installation wizard. The following example uses Apache HTTP Server2.2 running in the Windows XP operating system.

Procedure

  1. Choose Start > All Programs > Apache HTTP Server 2.2 > Monitor Apache Servers.

    • If is displayed in the system tray, the Apache server is stopped. Go to Step 2.
    • If is displayed in the system tray, the Apache server is running. Skip step 2 and go to step 3.
      NOTE:
      • After you install the Apache server, restart the system for the Apache service to take effect.

  2. Start the Apache server. You can start the Apache server in either of the following ways:

    • Click and choose Start.
    • Right-click , choose Open Apache Monitor. In the Apache Service Monitor window that is displayed, click Start.

  3. Copy files that IP phones will access to the root folder of the Apache server, for example, C:\Program Files\Apache Software Foundation\Apache2.2\htdocs.

    • If you place the files directly in the htdocs folder, type the address in the format of http://IP address of the PC where the Apache server is installed, for example, http://192.168.1.51, to access the Apache server.
    • If you place the files in a sub-folder of the htdocs folder, type the address in the format of http://IP address of the PC where the Apache server is installed/sub-folder name, for example, http://192.168.1.51/filename, to access the Apache server.

Translation
Download
Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 53176

Downloads: 1840

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next