No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

eSpace 8950 IP Phone V200R003C00 Administrator Guide

Provides information about deployment, operate and maintain the Video Phone.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
TR069

TR069

This section describes how to set parameters for connecting the IP phone to eSight.

  1. Access the phone web page as an administrator. For details, see Web Page Access.
  2. Choose Advanced > TR069.

    The TR069 page is displayed, as shown in Figure 6-13.

    Figure 6-13  TR069

  3. Set parameters (see Table 6-19 for detailed parameter descriptions).

    Table 6-19  Parameter description

    Parameter

    Description

    How to Set

    How to Modify the Configuration File

    TR069

    Indicates whether to enable TR-069. If you select Enable, the IP phone sends session connection requests to the ACS. If you select Disable, the IP phone does not send session connection requests to the ACS.

    Enable TR-069 when eSight is deployed. This facilitates phone management in batches.

    Default: Enable

    Parameter: enable

    Location: Device > ComCfg > ManagementServer

    Value: 0 or 1
    • 0: disable
    • 1: enable

    Example: enable="1"

    ACS User Name

    Indicates the user name used for eSight to authenticate the IP phone.

    Set this parameter to the authentication user name specified in the eSight configuration file.

    Default: eSight

    Parameter: Username

    Location: Device > ComCfg > ManagementServer

    Example: Username="eSight"

    ACS Password

    Indicates the password used for eSight to authenticate the IP phone.

    Set this parameter to the authentication password specified in the eSight configuration file.

    Default: eSight*123

    Parameter: Password

    Location: Device > ComCfg > ManagementServer

    Example: Password="eSight*123"

    ACS Address

    Indicates the URL for accessing the TR-069 service on eSight.

    • In encrypted transmission, set this parameter to the URL in format of https://eSight server address:8444/tr069/services/acs.
    • In non-encrypted transmission, set this parameter to the URL in format of http://eSight server address:8089/tr069/services/acs.

    Default: https://ucems.company.com :8444/tr069/services/acs

    Parameter: URL

    Location: Device > ComCfg > ManagementServer

    Example: URL="https://ucems.company.com :8444/tr069/services/acs"

    Report Interval

    Indicates the interval for the IP phone to initiate a connection session to the ACS.

    Set this parameter depending on your needs.

    Value range: 0-65535

    Unit: second

    Default: 1800

    Parameter: PeriodicInformInterval

    Location: Device > ComCfg > ManagementServer

    Unit: second

    Example: PeriodicInformInterval="600"

    CPE User Name

    Indicates the user name used for the IP phone to authenticate eSight. No configuration is required on eSight. Instead, the IP phone reports its user name to eSight in an unsolicited manner.

    It is recommended that you use the default value.

    Default: huawei

    Parameter: ConnectionRequestUsername

    Location: Device > ComCfg > ManagementServer

    Example: ConnectionRequestUsername="huawei"

    CPE Password

    Indicates the password used for the IP phone to authenticate eSight. No configuration is required on eSight. Instead, the IP phone reports its password to eSight in an unsolicited manner.

    It is recommended that you use the default value. To ensure communication security, change the password periodically.

    Default: huawei123

    Parameter: ConnectionRequestPassword

    Location: Device > ComCfg > ManagementServer

    Example: ConnectionRequestPassword="huawei123"

    Authentication Mode

    Indicates the authentication mode. Three options are available:
    • Basic: In basic authentication mode, user names and passwords are transmitted over the network in plaintext. Therefore, it is not a secure authentication mode, unless it works with some security approaches.
    • Digest: Similar to basic authentication, digest authentication authenticates two communication parties using the secrets (for example, passwords) that the two parties know. But unlike basic authentication, digest authentication transmits passwords in ciphertext.

    Default: Digest

    Parameter: ConnectionAuthType

    Location: Device > ComCfg > ManagementServer

    Value: 1, 2
    • 1: basic authentication
    • 2: digest authentication

    Example: ConnectionAuthType="2"

Translation
Download
Updated: 2018-09-12

Document ID: EDOC1000067158

Views: 47164

Downloads: 1810

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next