No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX110 Switch Module V100R001C10 User Guide 10

This document describes the features, installation, removing, and configuration methods of the CX110 GE switch module of the E9000 server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Logging In to the CX110 BIOS

Logging In to the CX110 BIOS

Log in to the BIOS of the CX110 through the serial port or using SOL. The BIOS is used to debug the CX110.

  • If the software version of the switching plane is earlier than 5.52, log in to the switching plane CLI through the serial port and then access the BIOS. There is no other way to access the BIOS. If the software version of the switching plane is 5.52 or later, log in to the switching plane CLI over SOL or serial port and then access the BIOS.
  • For the switching plane versions from 5.52 to 6.53 (excluding 6.53), if you access the switching plane CLI over SOL and then the BIOS, the operations such as changing the password and system upgrade through disk formatting cannot be performed on the BIOS. These operations are supported on the BIOS from switching plane version 6.53.

The BIOS initializes hardware, such as serial ports or dual in-line memory modules (DIMMs), reads the kernel image from the flash memory to the random access memory (RAM), and starts the operating system (OS). In the BIOS, you can load underlying software and debug underlying devices.

Prerequisites

Data

Password for logging in to the BIOS of the CX110.

Procedure

  1. Log in to the GE switching plane CLI through the serial port or using SOL. For details, see Logging In to the CLI of Each Switching Plane.
  2. Log in to the CX110 BIOS.

    1. Run the following command on the CLI of the GE switching plane to restart the GE switching plane:

      <HUAWEI> reboot

      The command output is as follows:

      Warning: Current configuration will be saved to the next startup saved-configuration file! Continue? [Y/N]:

      Enter Y to save the configuration. The command output is as follows:

      Now saving the current configuration.                                            
      Save the configuration successfully.                                             
                                                                                       
      begin synchronize configuration to SMM ...                                       
      slot 4: configuration is the same with SMM, needn't sync to SMM.                                
                                                                                       
      System will reboot! Continue? [Y/N]:     

      Enter Y to restart the GE switching plane.

    2. Press Ctrl+B when the system displays Press CTRL+B to enter BIOS menu.

      The command output is as follows:

      Password:
    3. Enter the BIOS login password.

      The BIOS menu screen is displayed:

      Enter your choice(1-9):  
             
            BIOS Menu (Version: 2.42) 
      
           1. Continue to boot 
           2. Update from serial interface 
           3. Update from ethernet interface 
           4. Modify startup parameters 
           5. File system 
           6. Modify BIOS password 
           7. Modify console password 
           8. Rollback from VRPv8 to VRPv5
           9. Reboot
    4. Perform an operation on the menu based on service requirements.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000068625

Views: 19856

Downloads: 487

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next