No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX110 Switch Module V100R001C10 User Guide 10

This document describes the features, installation, removing, and configuration methods of the CX110 GE switch module of the E9000 server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hardware Structure

Hardware Structure

This topic describes the components, main board layout, and connectors of the CX110.

Figure 2-6 shows the components of the CX110.

Figure 2-6 Component

1

CPU

2

GE switch module

3

Heat sink

4

Midplane signal connector

5

Midplane power connector

-

-

Table 2-5 describes the components of the CX110.

Table 2-5 Components

No.

Name

Description

1

CPU

A high-performance processor, which is used to process protocol packets and configuration management.

2

GE switch module

A functional module of the CX110, which is used to forward large-capacity service packets.

3

Heat sink

Cools CPUs. Each CPU is configured with one heat sink.

4

Midplane signal connector

Exchanges data between the CX110 and nodes in the front slots.

5

Midplane power connector

Supplies 12 V DC power for the CX110.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000068625

Views: 18630

Downloads: 487

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next