No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX110 Switch Module V100R001C10 User Guide 10

This document describes the features, installation, removing, and configuration methods of the CX110 GE switch module of the E9000 server.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Appearance

Appearance

This topic describes the CX110 in terms of its appearance, panel, and installation positions in the chassis.

Appearance

Figure 2-1 Appearance

Installation Positions

The CX110 can be installed in the four slots at the rear of the E9000 chassis. The four slots are 1E, 2X, 3X, and 4E, as shown in Figure 2-2.

Figure 2-2 Installation positions and slot numbering

Panel

Figure 2-3 Panel

1

Product model

2

Customization label (with an ESN label)

3

Stacking status indicator

4

Health status indicator

5

Offline button/indicator

6

BMC serial port

7

GE electrical port

8

10GE optical port

9

Data transmission status indicator of the 10GE optical port

10

Connection status indicator of the 10GE optical port

11

GE electrical port indicator

12

SYS serial port

NOTE:

The numbers on the left side are port serial numbers. The arrow direction of a triangle indicates the direction of a port.

ESN

An Equipment Serial Number (ESN) uniquely identifies a server. An ESN is required when you apply for technical support from Huawei.

Figure 2-4 ESN example

Callout No.

Description

1

ESN ID (two characters), which is 21 by default.

2

Material identification code (eight characters), that is, processing code.

3

Vendor code (two characters). The code 10 indicates Huawei, and other values indicate outsourcing vendors.

4

Year and month (two characters).

  • The first character indicates the year, where:
    • Digits 1 to 9 indicate 2001 to 2009, respectively.
    • Letters A to H indicate 2010 to 2017, respectively.
    • Letters J to N indicate 2018 to 2022, respectively.
    • Letters P to Y indicate 2023 to 2032, respectively.
NOTE:

The years from 2010 are represented by upper-case letters excluding I, O, and Z because the three letters are similar to the digits 1, 0, and 2.

  • The second character indicates the month, where:
    • Digits 1 to 9 indicate January to September, respectively.
    • Letters A to C indicate October to December, respectively.

5

Serial number (six characters).

6

RoHS compliance (one character). Y indicates environmental protection processing.

7

Internal model, that is, product name.

Translation
Download
Updated: 2019-08-09

Document ID: EDOC1000068625

Views: 20037

Downloads: 487

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next