No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 uMate User Guide 37

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
GUI

GUI

Scenarios

Configure the number of threads and the IPMI, SNMP, SSH, and VMM protocols and the FTP service required when uMate is used.

Prerequisites

Conditions

None

Data

No data preparation is required for this operation.

Procedure

  1. Run the following command to go to the uMate-Linux-Vxxx directory:

    cd

    [root@localhost /]# cd home/uMate-Linux-Vxxx/ 
    [root@localhost uMate-Linux-Vxxx]# ls 
    bin  config  help  hwServers.xls  hwServers.xml  image  jre  lib  serviceConf.xml  template  tools  uMate_CLI.sh  uMate.sh

  2. Run the following command to open the uMate main window:

    ./uMate.sh

    Figure 3-4 shows the uMate main window.

    Figure 3-4 uMate main window

  3. Configure uMate. For details, see GUI.
Translation
Download
Updated: 2019-07-10

Document ID: EDOC1000068881

Views: 91383

Downloads: 5384

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next