No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Tools 2.0 uMate User Guide 37

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).



Use ipmitool.exe on Windows.

  • This program is the execution program of IPMI commands and supports standard IPMI commands.
  • Avoid using this interface directly. Only professional personnel can use this interface.
  • For details about IPMItool, see





No data preparation is required for this operation.


  1. On the CLI, switch to the directory in which ipmitool.exe is stored, as shown in Figure C-17.

    Figure C-17 ipmitool.exe

  2. Run the ipmitool.exe -h command to view command help information, as shown in Figure C-18.

    Figure C-18 Help information

  3. Run IPMItool commands as required.

    To query server FRU information, run the command shown in Figure C-19.

    Figure C-19 Querying FRU information

Updated: 2019-07-10

Document ID: EDOC1000068881

Views: 91393

Downloads: 5384

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next