No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Tools 2.0 uMate User Guide 37

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SSH Port Disabled

SSH Port Disabled


When an in-band preventive inspection is performed on a VMware OS, Unable to establish LAN session, please check ipmi configuration and network. is displayed.


The SSH port is not enabled.


  1. Switch to the VMware OS GUI, as shown in Figure 6-3.
    Figure 6-3 VMware OS GUI
  2. Select Troubleshooting Options.

    The Troubleshooting Options page is displayed, as shown in Figure 6-4.

    Figure 6-4 Troubleshooting Options page
  3. Select Enable SSH and press Enter.

    The SSH port is enabled if SSH is Enabled shown in Figure 6-5 is displayed.

    Figure 6-5 SSH port enabled
Updated: 2019-07-10

Document ID: EDOC1000068881

Views: 91897

Downloads: 5400

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next