No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Tools 2.0 uMate User Guide 37

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
IPMItool Interface

IPMItool Interface


Use the IPMItool interface on Windows.

  • The IPMItool interface is an encapsulation of IPMItool components. It supports standard IPMI commands.
  • uMate running on Windows incorporates tools\ipmitool\ipmitool.exe For details about ipmitool.exe, see ipmitool.exe.
  • uMate running on Linux incorporates the IPMItool commands provided by Linux.
  • Avoid using this interface directly. Only professional personnel can use this interface.
  • For details about IPMItool, see





No data preparation is required for this operation.


  1. Enter cmd in the navigation bar of the uMate folder, press Enter, and enter dir.

    D:\uMate\FusionServer Tools-uMate-Win-Vxxx>dir 
     Volume in drive D is DataDisk 
     Volume Serial Number is C081-3EC9 
     Directory of D:\uMate\FusionServer Tools-uMate-Win-Vxxx 
    2017/10/13  16:52    <DIR>          . 
    2017/10/13  16:52    <DIR>          .. 
    2017/08/18  11:12         2,031,329 bin 
    2017/10/13  16:52    <DIR>          config 
    2017/10/13  16:52    <DIR>          help 
    2016/11/23  14:09            22,528 hwServers.xls 
    2017/06/09  09:08             3,782 hwServers.xml 
    2017/10/13  16:52    <DIR>          image 
    2017/10/13  16:52    <DIR>          jre 
    2017/10/13  16:52    <DIR>          lib 
    2017/10/13  16:52    <DIR>          log 
    2016/10/08  17:15                 0 runningFlag 
    2017/10/13  16:52    <DIR>          template 
    2017/08/09  20:14               758 tool.ini 
    2017/10/13  16:52    <DIR>          tools 
    2016/12/30  10:14           455,680 uMate.exe 
    2016/11/30  16:25             6,749 uMate.png 
    2017/07/20  14:58           431,104 uMate_CLI.exe 
                   8 File(s)      2,951,930 bytes 
                  10 Dir(s)  27,113,402,368 bytes free

  2. Run the uMate_CLI.exe ipmitool -h command to view command help information, as shown in Figure C-7 and Figure C-8.


    Run the ./ ipmitool -h command on Linux to view help information.

    Figure C-7 Help information
    Figure C-8 Help information

  3. Run IPMItool commands as required.

    To query server FRU information, run the command shown in Figure C-9.

    Figure C-9 Querying FRU information

Updated: 2019-07-10

Document ID: EDOC1000068881

Views: 92588

Downloads: 5415

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next