No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Tools 2.0 uMate User Guide 37

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Uploading the Software Package

Uploading the Software Package


  1. Double-click Xshell.exe.

    The Xshell client is accessed.

  2. Run the following command to connect to the server Linux OS:

    ssh IP address of the server Linux OS

    The SSH User Name window is displayed, as shown in Figure 2-2.

    Figure 2-2 SSH User Name

  3. Enter the user name of the server Linux OS, and click OK.

    The SSH User Authentication window is displayed, as shown in Figure 2-3.

    Figure 2-3 SSH User Authentication

  4. Enter the password corresponding to the user name of the server Linux OS, and click OK.

    The connection to the server Linux OS starts.

    The server Linux OS is successfully connected, as shown in Figure 2-4.

    Figure 2-4 Connection succeeded

  5. Click .

    The SSH User Authentication window is displayed, as shown in Figure 2-5.

    Figure 2-5 SSH User Authentication

  6. Enter the password in 4, and click OK.

    The main window of Xftp is displayed.

  7. Find the location of the FusionServer Tools-uMate-Linux-Vxxx.tar.gzfile on the local PC, and select the uploading path on the server Linux OS (the /home directory is recommended), as shown in Figure 2-6.

    Figure 2-6 Selecting the uploading path

  8. Drag the FusionServer Tools-uMate-Linux-Vxxx.tar.gz file from the left pane to the right pane.

    The file uploading starts. When the FusionServer Tools-uMate-Linux-Vxxx.tar.gz file is displayed in the right pane, the file is uploaded successfully, as shown in Figure 2-7.

    Figure 2-7 Uploading succeeded

Updated: 2019-07-10

Document ID: EDOC1000068881

Views: 106913

Downloads: 5613

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next