No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


FusionServer Tools 2.0 uMate User Guide 37

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
SNMP Interface

SNMP Interface


Use the SNMP interface on Windows.

  • The SNMP interface is an encapsulation of snmp4j components. It is used to transparently send SNMP commands.
  • Avoid using this interface directly. Only professional personnel can use this interface.
  • For details about the SNMP commands supported by Huawei servers, refer to the MIB documents of the servers.
  • For details about snmp4j, see





No data preparation is required for this operation.


  1. Enter cmd in the navigation bar of the uMate folder, press Enter, and enter dir.

    D:\uMate\FusionServer Tools-uMate-Win-Vxxx>dir 
     Volume in drive D is DataDisk 
     Volume Serial Number is C081-3EC9 
     Directory of D:\uMate\FusionServer Tools-uMate-Win-Vxxx 
    2017/10/13  16:52    <DIR>          . 
    2017/10/13  16:52    <DIR>          .. 
    2017/08/18  11:12         2,031,329 bin 
    2017/10/13  16:52    <DIR>          config 
    2017/10/13  16:52    <DIR>          help 
    2016/11/23  14:09            22,528 hwServers.xls 
    2017/06/09  09:08             3,782 hwServers.xml 
    2017/10/13  16:52    <DIR>        image 
    2017/10/13  16:52    <DIR>          jre 
    2017/10/13  16:52    <DIR>          lib 
    2017/10/13  16:52    <DIR>          log 
    2016/10/08  17:15                 0 runningFlag 
    2017/10/13  16:52    <DIR>          template 
    2017/08/09  20:14               758 tool.ini 
    2017/10/13  16:52    <DIR>          tools 
    2016/12/30  10:14           455,680 uMate.exe 
    2016/11/30  16:25             6,749 uMate.png 
    2017/07/20  14:58           431,104 uMate_CLI.exe 
                   8 File(s)      2,951,930 bytes 
                10 Dir(s)  27,113,402,368 bytes free

  2. Run the uMate_CLI.exe snmp command to view command help information, as shown in Figure C-1, Figure C-2, and Figure C-3.


    Run the ./ snmp command on Linux to view help information.

    Figure C-1 Help information
    Figure C-2 Help information
    Figure C-3 Help information

  3. Run SNMP commands as required.

    • To query the E9000 HMM name, run the command shown in Figure C-4.
    Figure C-4 Querying the E9000 HMM name
    • To start an upgrade, run the command shown in Figure C-5.
    Figure C-5 Starting an upgrade
    • To query upgrade progress, run the command shown in Figure C-6.
    Figure C-6 Querying the upgrade progress

Updated: 2019-07-10

Document ID: EDOC1000068881

Views: 106773

Downloads: 5611

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next