No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

FusionServer Tools 2.0 uMate User Guide 36

Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Viewing and Setting BMC SNMP Protocols

Viewing and Setting BMC SNMP Protocols

Scenarios

View and set the BMC SNMP protocols on the BMC WebUI. In this topic, Internet Explorer 11 is used as an example.

Prerequisites

Conditions

The IP address of the local computer and the IP address of the server BMC management network port are on the same network segment.

Data

You have obtained the following data:

  • IP address and subnet mask for the BMC management network port. The IP address indicates only the IPv4 address.
  • User name and password for logging in to BMC

Procedure

  • Open Internet Explorer, enter the BMC IP address in the address box as follows:
  • View and set the iMana SNMP protocols.
    1. Press Enter.

      The security alert dialog box is displayed.

    2. Click Continue to this website (not recommended).

      The login page is displayed, as shown in Figure 5-13.

      Figure 5-13 iMana login page
      NOTE:

      You can click Reset to reset the information on the iMana user login page.

    3. On the login page, set the parameters as follows:
      • Select a language.
      • Enter a user name. The default user name is root.
      • Enter a password. The default password is Huawei12#$ or root.
      • Select This iMana from the Log on to drop-down list.
      • Click Log In.

      The iMana management page is displayed, as shown in Figure 5-14.

      Figure 5-14 iMana WebUI
    4. Choose Configuration > Service.

      The Service Configurations window is displayed, as shown in Figure 5-15.

      Figure 5-15 Service Configurations window
    5. Click SNMP Configuration to view and set the SNMP protocol versions supported by iMana, as shown in Figure 5-16.
      Figure 5-16 Viewing the SNMP protocols on the iMana WebUI
  • View and set the iBMC port information.
    1. Press Enter.

      The security alert dialog box is displayed.

    2. Click Continue to this website (not recommended).

      The login page is displayed, as shown in Figure 5-17.

      Figure 5-17 iBMC login page
    3. On the login page, set the parameters as follows:
      • Select a language.
      • Enter a user name. The default user name is root.
      • Enter a password. The default password is Huawei12#$ or root.
      • Select This iBMC from the Log on to drop-down list.
      • Click Log In.

      The iBMC management page is displayed, as shown in Figure 5-18.

      Figure 5-18 iBMC WebUI
    4. Choose Config > System Settings.

      The System Settings window is displayed. You can view and set the SNMP protocol versions supported by iBMC, as shown in Figure 5-19.

      Figure 5-19 System Settings window
Translation
Download
Updated: 2019-05-17

Document ID: EDOC1000068881

Views: 71843

Downloads: 5017

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next