No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX220 Switch Module V100R001C10 User Guide 08

This document describes the CX220 FC switch module of the E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the FC Switching Plane

Configuring the FC Switching Plane

This topic describes how to use the MM910 and Brocade Fabric OS CLI to configure the MX220 mezzanine switch module (FC switching plane).

You are advised to use the MM910 to perform any operation that the MM910 supports to improve operation efficiency.

NOTICE:

At the first login to the MX220 switch module, promptly change its IP address and default password, and configure zones based on application scenarios.

Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000069171

Views: 27043

Downloads: 1134

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next