No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX220 Switch Module V100R001C10 User Guide 08

This document describes the CX220 FC switch module of the E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Overview

Configuration Overview

Configuration Process

Figure 4-1 Switch module configuration process

The FC switching plane refers to the MX220 in the CX220. This document describes the features and common configurations of the FC switching plane.

Related Documents

Related documents of the FC switching plane in the CX220 are as follows:

NOTE:
  • The FC switching plane software is Brocade Fabric OS, which is indendently developed by Brocade.
  • To ensure that the devices registered on the MX220 communicate properly with other devices, configure zones based on application scenarios. For details about the configuration method, see Configuring Zones Using Commands or Configuring Zones Using Web Tools.
Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000069171

Views: 27787

Downloads: 1150

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next