No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

CX220 Switch Module V100R001C10 User Guide 08

This document describes the CX220 FC switch module of the E9000 server in terms of its features, installation, removal, and configuration.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Disabling SNMP

Disabling SNMP

Disable SNMPv1/2c of MX220 on the command-line interface (CLI).

Procedure

  1. Log in to the CLI of the FC switching plane.
  2. Log in to the MX220 using the default management account.
  3. Run the snmpConfig disable command on the CLI to disable SNMPv1/2c.

    switch:admin>snmpconfig --disable snmpv1 
    switch:admin>snmpconfig --show 
    SNMPv1 community and trap recipient configuration: 
    Community 1: ram (rw) 
    Trap recipient: 172.26.4.84 
    Trap port: 162 
    Trap recipient Severity level: 5 
    Community 2: OrigEquipMfr (rw) 
    No trap recipient configured yet 
    Community 3: private (rw) 
    No trap recipient configured yet 
    Community 4: public (ro) 
    No trap recipient configured yet 
    SNMPv1:Disabled

Translation
Download
Updated: 2018-09-20

Document ID: EDOC1000069171

Views: 24509

Downloads: 1114

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next