No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.

CX710 Switch Module V100R001 User Guide 12

This document describes the CX710 40GE converged switch module of the E9000 server in terms of its features, installation, removal, and configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Using the MM910 WebUI to Collect 40GE converged switching plane Information

Using the MM910 WebUI to Collect 40GE converged switching plane Information

This topic describes how to use the MM910 WebUI (MM910 software version: 6.00 or later) to collect logs of the 40GE converged switching plane (switching plane software version: 5.30 or later).


To use the one-click full collection function of the MM910 to collect 40GE converged switching plane logs, the following two conditions must be met:

  • The MM910 software version is 6.00 or later.
  • The 40GE converged switching plane software version is 5.30 or later.


  1. Log in to the MM910 WebUI.

    For details, see Logging In to the MM910 WebUI.

  2. Choose System Management > Information Collection and set the information collection parameters.

    • Collected from: Select MM.
    • Collected content: Select One-click full collection.

  3. Click Start Collection to start collecting logs. See Figure 5-12.

    Figure 5-12 Information collection

  4. In the displayed dialog box, click Save and save the log file to the local PC.
  5. Decompress the one_touch_info_all.tar.gz file. The collected logs of the 40GE converged switching plane are in the swin_fru2 folder.

    n is the switch module or passthrough module slot number and ranges from 1 to 4.

Updated: 2019-12-04

Document ID: EDOC1000069172

Views: 32036

Downloads: 463

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next