No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade
CX710 Switch Module V100R001 User Guide 12

This document describes the CX710 40GE converged switch module of the E9000 server in terms of its features, installation, removal, and configuration.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Overview

Configuration Overview

Configuration Process

Figure 4-1 Switch module configuration process
Table 4-1 Configuration process description

Step

Description

Set an IP address for the management network port.

Set the IP address for the management network port of the 40GE converged switching plane.

You can log in to the CLI of the switching plane from a PC by using the IP address of the management network port.

Log in to the CLI of each switching plane.

You can log in to the 40GE converged switching plane CLI over Secure Shell (SSH), Serial Over LAN (SOL), or a serial port.

Check the switching plane.

Check the following items in the 40GE converged switching plane of the CX710:

  • Query versions and check whether the versions are the required ones.
  • Query alarms and check whether an alarm is generated.

Changing the Initial User Passwords

Change the initial user passwords after the first login to the CX710 to ensure the security of system operating and maintenance.

This topic describes how to change the initial user passwords of the BMC, 40GE converged switching plane, and BIOS.

Add a user.

Add a user in the 40GE converged switching plane of the CX710. You can log in to the switching plane CLI for routine maintenance as the new user.

Configure switch module data.

This topic describes the switching service data supported by the 40GE converged switching plane of the CX710.

Back up configuration files.

Back up the configuration file of the 40GE converged switching plane for the CX710. If configuration errors occur or the CX710 is faulty, you can use the backup configuration file to restore configuration data.

Related Documents

Related documents of the 40GE converged switching plane in the CX710 are as follows:

Translation
Download
Updated: 2019-12-04

Document ID: EDOC1000069172

Views: 32141

Downloads: 463

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next