No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

MZ220 NIC V100R001 User Guide 06

This document describes the MZ220 in terms of its functions, appearance, features, configuration methods, and application examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing and Uninstalling the MZ220 Drivers in the OS

Installing and Uninstalling the MZ220 Drivers in the OS

The MZ220 drivers vary according to the OS. This section describes how to install them in SLES 11 and Windows Server 2008.

SLES 11

For details about how to download the driver software package, see Installing Drivers and Firmware > Preparing for Installation in Huawei Server OS Installation Guide.

The MZ220 drivers for SLES 11 consist of Ethernet (be2net) and FC (lpfc) drivers. Run the modinfo command to view the driver version information, as shown in Figure 4-35.

Figure 4-35 MZ220 driver version information in SLES 11

To install the MZ220 drivers in SLES 11, perform the following steps:

  1. Decompress the driver package, and check that a directory is generated, for example, /elx-lpfc-dd-sles11sp-8.3.7.18-1.
  2. Go to the lpfc driver file directory, and run the driver installation file (.sh file).

    #./elx_lpfc_install.sh

To uninstall the MZ220 drivers in SLES 11, perform the following steps:

  1. Go to the lpfc driver file directory, and run the driver installation file (.sh file), with the –u parameter added to the command.

    #./elx_lpfc_install.sh -u

Windows

For details about how to download the driver software package, see Installing Drivers and Firmware > Preparing for Installation in Huawei Server OS Installation Guide.

The MZ220 drivers for Windows are FC drivers. Figure 4-36 shows the driver file name.

Figure 4-36 MZ220 driver files in Windows Server 2008

In Windows, choose to install the FC driver.

To uninstall the driver in Windows, open Device Manager, double-click the MZ220 port, select Driver in the displayed window, and click Uninstall.

Translation
Download
Updated: 2019-01-26

Document ID: EDOC1000069173

Views: 11413

Downloads: 678

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next