No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MZ220 NIC V100R001 User Guide 06

This document describes the MZ220 in terms of its functions, appearance, features, configuration methods, and application examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).


The MZ220 can be installed in slot Mezzanine1 (Mezz1 for short) or Mezzanine2 (Mezz2 for short) on a half-width E9000 compute node or in slot Mezz1, Mezz2, Mezzanine3 (Mezz3 for short), or Mezzanine4 (Mezz4 for short) on a full-width E9000 compute node.

The MZ220 provides network ports for connecting to switch modules:

  • When the MZ220 is installed in slot Mezz1 or Mezz3, its two ports connect to switch modules in slots 2X and 3X.
  • When the MZ220 is installed in slot Mezz2 or Mezz4, its two ports connect to switch modules in slots 1E and 4E.
Figure 1-1 MZ220 appearance

Figure 1-2 MZ220 installation positions on a half-width compute node

Figure 1-3 MZ220 installation positions on a full-width compute node

Updated: 2019-01-26

Document ID: EDOC1000069173

Views: 11171

Downloads: 675

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next