No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


MZ220 NIC V100R001 User Guide 06

This document describes the MZ220 in terms of its functions, appearance, features, configuration methods, and application examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Feature Description

Feature Description


The MZ220 supports the NPIV feature when it operates in FCoE mode. With this feature, each port supports a maximum of 255 virtual N_Port_IDs and its own physical N_Port_ID.

Virtual N_Port_IDs can be assigned to VMs. In this way, the mapping between virtual N_Port_IDs and VMs is set up.

SAN Boot

The MZ220 supports the SAN Boot feature. This feature is used for remote boot over the FC SAN. It enables users to connect to the remote FC array for loading an OS.

Updated: 2019-01-26

Document ID: EDOC1000069173

Views: 9938

Downloads: 667

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next