No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


Remote Replication Feature Guide for File 04

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R002

"This document describes the file system remote replication feature, in terms of the implementation principle,application scenario, and explains how to configure and manage this feature."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Data Recovery

Data Recovery

After the primary site of a remote replication session fails, the secondary temporarily takes over services of the primary site. When the primary recovers, services are switched back to the primary site. This section describes how the storage system recovers from a site failure. This section will help you with remote replication configuration, site recovery, and fault analysis in disaster recovery scenarios.

After the primary site recovers, data is switched from the secondary site to the primary site. Then the primary site can provide services again. Figure 1-4 shows how the storage system recovers data at the primary site after a disaster.
Figure 1-4  Process of recovering data at the primary site after a disaster


In an asynchronous remote replication scenario, the storage system performs data synchronization multiple times until the data difference between the primary and secondary file system is comparatively small. Then, the storage system stops services and performs the last synchronization. This prevents data loss and minimizes the downtime.

Updated: 2019-01-02

Document ID: EDOC1000069276

Views: 10428

Downloads: 194

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next