No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

Remote Replication Feature Guide for File 04

OceanStor 5300 V3, 5500 V3, 5600 V3, 5800 V3, and 6800 V3 Storage System V300R002

"This document describes the file system remote replication feature, in terms of the implementation principle,application scenario, and explains how to configure and manage this feature."
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Managing a Route

Managing a Route

If iSCSI networking is adopted and data needs to be transmitted across network segments, you need to configure routes.

Context

The ethernet port has been assigned an IP address.
NOTE:
In redundant links, you must configure IP addresses and route for multiple Ethernet ports.

Procedure

  1. Go to the Ethernet Ports management page.
    1. On the right navigation bar, click .

      The Provisioning page is displayed.

    2. Click Port.

      The Port page is displayed.

    3. Click Ethernet Ports tab.

      The Ethernet Ports page is displayed.

  2. Select the ethernet port for which you want to add a route and click Route Management.

    The Route Management dialog box is displayed.

  3. Configure the route information for the ethernet port.
    1. In IP Address, select the IP address of the ethernet port.
    2. Click Add.

      The Add Route dialog box is displayed.

      • The default IP addresses of the internal heartbeat network ports on the dual-controller storage system are 127.127.127.10 and 127.127.127.11, and the default IP addresses of the internal heartbeat network ports on the four-controller storage system are 127.127.127.10, 127.127.127.11, 127.127.127.12, and 127.127.127.13. Therefore, the IP address of the router cannot fall within the 127.127.127.XXX segment. Besides, the IP address of the gateway cannot be 127.127.127.10, 127.127.127.11, 127.127.127.12, or 127.127.127.13. Otherwise, routing will fail. (Internal heartbeat links are established between controllers for these controllers to detect each other's working status. You do not need to separately connect cables. In addition, internal heartbeat IP addresses have been assigned before delivery, and you cannot change these IP addresses).
      • Because network segments 172.16.126.XXX and 172.16.127.XXX are occupied by the engines' management network ports and data switches' network ports, Destination Address and Gateway cannot reside on the network segments.

    3. In Type, select the type of the route to be added.

      There are three route options:

      • Default route

        Data is forwarded through this route by default if no preferred route is available. The target address field and the target mask field (IPv4) or prefix (IPv6) of the default route are automatically set to 0. To use this option, you only need to add a gateway.

      • Host route

        The host route is the route to an individual host. The target mask (IPv4) or prefix (IPv6) of the host route are automatically set respectively to 255.255.255.255 or 128. To use this option, you only need to add the target address and a gateway.

      • Network segment route

        The network segment route is the route to a network segment. You need to add the target address, target mask (IPv4) or prefix (IPv6), and gateway.

    4. Set Destination Address.

      • If IP Address is an IPv4 address, set Destination Address to the IPv4 address or network segment of the application server's service network port or that of the other storage system's ethernet port.
      • If IP Address is an IPv6 address, set Destination Address to the IPv6 address or network segment of the application server's service network port or that of the other storage system's ethernet port.

    5. Set Destination Mask (IPv4) or Prefix (IPv6).

      • If a Destination Mask is set for an IPv4 address, this parameter specifies the subnet mask of the IP address for the service network port on the application server or storage device.
      • If a Prefix is set for an IPv6 address, this parameter specifies the prefix of the IPv6 address for application server's service network port or that of the other storage system's ethernet port.

    6. In Gateway, enter the gateway of the local storage system's ethernet port IP address.
  4. Click OK. The route information is added to the route list.

    The Danger dialog box is displayed.

  5. Confirm the information of the dialog box and select I have read and understood the consequences associated with performing this operation..
  6. Click OK.

    The Success dialog box is displayed indicating that the operation succeeded.

    NOTE:

    To remove a route, select it and click Remove.

  7. Click Close.
Translation
Download
Updated: 2019-01-02

Document ID: EDOC1000069276

Views: 10137

Downloads: 194

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next