Preparing Installation Tools and Accessories

Protective gloves

Used to protect hands during operation.

ESD gloves

Used to prevent electrostatic discharges.

ESD wrist strap

Used to prevent electrostatic discharges. Wear the strap on your wrist and insert the other end into the ESD jack on the cabinet.

Utility knife

Used to cut cartons or paper.

Scissors

Used to cut the installation template.

Tweezers

Used to remove optical fibers or network cables.

Measuring tape

Used to measure distances.

Marker

Used to mark component installation positions.

Flat-head screwdriver

Used to turn slotted-head screws and bolts.

Phillips screwdriver

Used to turn cross-head screws and bolts.

Diagonal pliers

Used to cut insulation tubes and cable ties.

Adjustable wrench

Used to tighten or loosen hex or square bolts and nuts. The span can be adjusted to suit bolts or nuts in different sizes.

Needle-nose pliers

Used to raise locking bars on a crate.

Network cable tester

Used to test network cable connectivity.

Multimeter

Used to test cabinet insulation, cable connectivity, and device electrical performance indicators, including voltage, current, and resistance.

Insulation tape

Used to insulate power wires or other conductors.

Corrugated pipe

Used to protect optical fibers.

Cable tie (150 x 3.6 mm)

50

Used to bundle cables.

21100015

Cable tie (300 x 3.6 mm)

50

Used to bundle cables.

21100144

Tweezers

1

Used to install or remove optical fibers on optical ports.

63120166

Signal cable label

5

Used to identify locations of signal cables.

29041060

Power cable label

1

Used to identify the location of the power cable.

29041061

ESD wrist strap

1

Prevents ESD damages when you touch or operate the equipment or components.

28050001

Fiber binding tape

1 m

Used to bundle optical fibers.

21101258

Serial cable

1

Used to connect the console port of the switch to a serial port of a maintenance terminal for local commissioning or maintenance of the switch.

04051113

Ground cable

1

Used to ground the switch.

04046941

Removable handle

2

Used to move the switch.

21240406

Panel screw (M6X12)

15

Used to fix the switch.

26020141

Floating nut (M6)

15

Installed on mounting rails of a cabinet/rack and used with M6 screws to secure the switch in the cabinet/rack.

26020075

Quick Installation Guide

1

Used to guide equipment installation.

• S12704, S12708, S12710, and S12712: 31507800
• S12700E-4, S12700E-8, and S12700E-12: 31500AWV

Cable management frame

1

Install on the switch to route cables.

• S12704 and S12700E-4: 21123608
• S12708 and S12700E-8: 21212340
• S12712 and S12700E-12: 21212341