Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Installing Cable Management Frames
Tools and Accessories
- ESD wrist strap or ESD gloves
- Phillips screwdriver
- Cable management frames and matching screws
Procedure
- Take out the cable management frames and screws from the package.
- Wear an ESD wrist strap or a pair of ESD gloves. When wearing an ESD wrist strap, insert the other end in the ESD jack of a device and ensure that the device is reliably grounded.
- Align positioning pins on a cable management frame with positioning holes on the chassis, hang the cable management frame in the positioning holes, and drag it downward to secure it on the chassis. See callout 1 in Figure 8-6.
- Install all cable management frames in the same way, and then use a Phillips screwdriver to tighten all the screws. See callout 2 in Figure 8-6.
