No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 and S12700E Series Agile Switches Hardware Installation and Component Replacement

This document describes hardware installation procedures of the S12700 series switches, troubleshooting methods for common hardware faults, and switch maintenance instructions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Switches Overview

Switches Overview

The figures in this document are for reference only.

S12700 Series

The S12700 series is available in S12704, S12708, S12710, and S12712. Figure 2-1 shows these chassis models.

Figure 2-1 S12704, S12708, S12710, and S12712 chassis

Table 2-1 lists the specifications of the S12700 series switches.

Table 2-1 Specifications of the S12700 series switches

Model

Height

W x D (Without Mounting Brackets)

Weight (Empty/Fully Configured)

Maximum Power Consumption (Fully Configured, Without PoE Power Supply)

S12704

441.7 mm (10 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 517.4 mm

24.5 kg/71.3 kg

2550 W

S12708

663.9 mm (15 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 517.4 mm

42 kg/120 kg

5234 W

S12710

663.9 mm (15 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 517.4 mm

28.6 kg/98.4 kg

4644 W

S12712

841.75 mm (19 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 517.4 mm

64 kg/159 kg

6790 W

S12700E Series

The S12700E series is available in S12700E-4, S12700E-8, and S12700E-12. Figure 2-2 shows these chassis models.

Figure 2-2 S12700E-4, S12700E-8, and S12700E-12 chassis

Table 2-2 lists the specifications of the S12700E series switches.

Table 2-2 Specifications of the S12700E series switches

Model

Height

W x D (Without Mounting Brackets)

Weight (Empty/Fully Configured)

Maximum Power Consumption (Fully Configured, Without PoE Power Supply)

S12700E-4

441.7 mm (10 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 517.4 mm

24.5 kg/66 kg

3344 W

S12700E-8

663.9 mm (15 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 517.4 mm

42.5 kg/114 kg

6950 W

S12700E-12

841.75 mm (19 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 517.4 mm

71.8 kg/184 kg

8981 W

Translation
Download
Updated: 2019-11-30

Document ID: EDOC1000069460

Views: 45325

Downloads: 960

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next