No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches OSP Quick Start Quide

This document describes hardware installation and basic configuration of the OSP card.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting an OSP Card

Connecting an OSP Card

Figure 3-1 shows cable connections on an OSP card.

Figure 3-1  Cable connections on an OSP card

1. Console cable

  • The 8-pin RJ45 connector is connected to the console port on the OSP card.
  • The DB9 female connector is connected to a maintenance terminal, generally a computer.

2. Network cable with RJ45 connectors, which connects the GE port (ETH) to a management network

3. USB cable, which connects to a mouse, keyboard, or USB flash drive

4. VGA cable with DB15 male connectors, which connects to a computer monitor

Translation
Download
Updated: 2019-02-13

Document ID: EDOC1000069462

Views: 3176

Downloads: 224

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next