No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches OSP Quick Start Quide

This document describes hardware installation and basic configuration of the OSP card.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Functions and Features

Functions and Features

NOTE:

For details on IPS software installation and service configuration, see the IPS Software Installation and Configuration Guide.

The OSP card can not only process and forward service data, but also provide certain functions using specific operating system and application software.

The OSP card supports intrusion prevention system (IPS) software.

The IPS software provides comprehensive security functions:

  • Detects attacks based on a signature database. The IPS software can identify attacks targeted for vulnerabilities of commonly used applications (such as Adobe PDF Reader and Microsoft Office) and operating systems (such as Microsoft Windows), and abnormalities of these applications and operating systems.
  • Identifies behaviors that violate RFC standards through application identification, protocol decoding, and state detection, and prevents running of the applications that use vulnerabilities of protocols.
  • Detects attacks to HTTPS traffic and takes measures to protect the traffic.
  • Automatically updates and upgrades the signature database to defend against vulnerabilities of applications and operating systems in advance.
  • Supports periodic and emergent update of the signature database and allows users to add self-defined signatures according to their needs.
  • Prevents intrusions at a high precision using the default security policy and provides the bypass function.

The IPS software also provides comprehensive management functions:

  • Fine-grained right management: The IPS manages user rights based on different user levels, for example, monitoring level, configuration level, and management level.
  • System management based on the web system, command line interface (CLI), and Simple Network Management Protocol (SNMP).
  • Reports on logs and alarms: The IPS uses log analysis software to collect and analyze logs and alarms accurately, and provides various reports on the logs and alarms. Users can define reports according to their own needs.

Table 1-2 describes the functions and features of the OSP card running application software

Table 1-2  Functions and features of the OSP card running application software
Functions and Features Description

Operating system

VMware

Application software

IPS and other application software

CPU

Intel Core processor, 2.1 GHz, 4 cores, 6 Mbit/s cache

Memory

  • DDR3-1066/1333 MT/s
  • Standard configuration: two 2 GB memory cards (total capacity of 4 GB)
  • Maximum configuration: two 8 GB memory cards (total capacity of 16 GB)

Built-in flash memory

8 GB

Hard disk

  • Provides two 2.5-inch 500 GB enterprise Serial Advanced Technology Attachment (SATA) hard disks.
  • Supports RAID 0 and RAID 1.
  • Supports hot swap.
NOTICE:

Huawei-certified hard disks are required. Reliability of non-Huawei-certified hard disks cannot be ensured. Huawei is not responsible for any problems caused by non-Huawei-certified hard disks and will not fix such problems.

Hard disks provided by Huawei are certified.

Service port

Two 10GE ports

NOTE:
  • The two ports are not on the card panel.
  • You can run the interface interface-type interface-number command to enter the view of the two service ports. The interface number is 0 or 1.

Management port

One VGA port:
  • Hot swap
  • Standard DB15 socket
Two USB ports:
  • Hot swap
  • USB 2.0 High-Speed
  • USB Specification Rev.2.0

One serial port: UART port

One GE port: 10M/100M/1000M auto-sensing, RJ45 connector. The port enters sleeping state when no link is established.

Energy-saving

  • Dynamic voltage and frequency scaling for CPU
  • Sleeping of idle ports
  • Card power detection

Table 1-3 describes the functions and features of the OSP card for service data processing and forwarding.

Table 1-3  Functions and features of the OSP card for service data processing and forwarding
Function and Feature Description

Basic function

Service data processing and forwarding

Distributed forwarding

Performs concurrent data forwarding using a distributed data plane.

Queue

Eight queues on each port

Traffic scheduling

PQ, WRR, WDRR, PQ+WRR, and PQ+WDRR

Buffer

4 MB

Jumbo frame

A maximum of 12 Kbytes

The jumbo frame size can be set using the jumboframe enable command.

MAC table size

32K

Translation
Download
Updated: 2019-02-13

Document ID: EDOC1000069462

Views: 3191

Downloads: 224

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next