No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 Series Agile Switches Typical Configuration Examples

This document provides examples for configuring features in typical usage scenarios.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Log and Trap Management

Log and Trap Management

Checking Logs and Traps Reported by Devices

Procedure

  1. The following example checks whether SolarWinds receives traps from S12704-1 after an interface on it is shut down/brought up.

    [S12704-1] interface GigabitEthernet 1/1/1/2
    [S12704-1-GigabitEthernet1/1/1/2] shutdown

  2. Click ALERTS & ACTIVITY > Traps. It is found that SolarWinds receives traps indicating that the interface goes Down and the OSPF link status changes. These traps are generated after GE1/1/1/2 on S12704-1 is shut down.

  3. Bring GE1/1/1/2 on S12704-1 Up.

    [S12704-1-GigabitEthernet1/1/1/2] undo shutdown

  4. Check traps on SolarWinds. It is found that SolarWinds receives traps indicating that the interface goes Up, and the OSPF link status, LLDP neighbor status, device configuration, and MSTP topology change. These traps are generated after GE1/1/1/2 on S12704-1 is brought up.

Download
Updated: 2019-05-16

Document ID: EDOC1000069466

Views: 165667

Downloads: 1813

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next