Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Example for Deploying the NGFW Module and IPS Module on a Switch
- Layer 2 Load-Balancing Hot Standby on the NGFW Modules Installed on a Cluster Switch Where Redirection-based Traffic Diversion Is Implemented
- Layer 3 Active/Standby Hot Standby on the NGFW Modules Installed on a Cluster Switch Where Static Route-based Traffic Diversion Is Implemented
- Layer 3 Active/Standby Hot Standby on the NGFW Modules Installed on a Cluster Switch Where PBR-based Traffic Diversion Is Implemented
- Layer 3 Active/Standby Hot Standby on the NGFW Modules Installed on a Cluster Switch Where VLAN-based Traffic Diversion Is Implemented
- Deploying IPS Modules and NGFW Modules on a Layer 2 Dual-Node System and Importing Flows Through Redirection
- Deploying IPS Modules at Layer 2 and NGFW Modules on a Layer 3 Dual-Node System, and Importing Flows Based on Policy Routing