Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Typical QoS Configuration
- Example for Configuring Priority Re-marking and Queue Scheduling
- Example for Configuring Interface-based Rate Limiting on a Fixed Switch
- Example for Configuring Interface-based Rate Limiting on a Modular Switch
- Example for Configuring a Traffic Policy to Implement Rate Limiting
- Example for Configuring Rate Limiting in a Specified Time Range
- Example for Configuring Rate Limiting Based on VLAN IDs
- Example for Configuring Traffic Shaping (Using DiffServ Domain-Based Priority Mapping)
- Example for Configuring Traffic Shaping (Based on 802.1p Priority Trust)
- Example for Configuring Congestion Management (Schedule Template Mode)
- Example for Configuring Congestion Avoidance and Congestion Management (Using WRR Scheduling and an SRED Policy)
- Example for Configuring Congestion Avoidance and Congestion Management (Using PQ+WDRR Scheduling and a WRED Profile)
- Example for Configuring a Traffic Policy to Prevent Some Users from Accessing the Internet at the Specified Time
- Example for Configuring a Traffic Policy to Collect Statistics on Ping Packets
- Example for Configuring a Traffic Policy to Implement Traffic Statistics
- Example for Limiting Access Based on the Flow ID
- Example for Configuring a Traffic Policy to Limit Access Between Network Segments
- Example for Configuring HQoS