No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S7700 and S9700 Series Switches Hardware Installation and Maintenance Guide

This document describes hardware installation procedures of the S7700 and S9700 series switches, troubleshooting methods for common hardware faults, and switch maintenance instructions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hardware Installation and Component Replacement (3D Video & Infographics)

Hardware Installation and Component Replacement (3D Video & Infographics)

This page provides 3D video and infographics for switch hardware installation and component replacement.

Table 3-1  3D video for hardware installation and component replacement
Content Link

Replacing a 2200 W AC Power Module of the S Series Switches

Replacing a 2200 W AC Power Module of the S Series Switches

Replacing a Service Card of the S Series Switches

Replacing a Service Card of the S Series Switches

Replacing the Only MPU on the S Series Switches (Services Are Interrupted)

Replacing the Only MPU on an S Series Switches (Services Are Interrupted)

Replacing the Only MPU on the S Series Switches (Services Are Still Running)

Replacing the Only MPU on an S Series Switches (Services Are Still Running)

Replacing One of the MPUs on the S Series Switches

Replacing One of the MPUs on an S Series Switches

Replacing an SFU of the S Series Switches

Replacing an SFU of the S Series Switches

Replacing a CSS Subcard of the S Series Switches

Replacing a CSS Subcard of the S Series Switches

Replacing a Fan Module of the S Series Switches

Replacing a Fan Module of the S Series Switches

Table 3-2  Infographics for hardware installation and component replacement
Content Link

Install Switch

Installation and Parts Replacement

Replacing the Only MPU on a Switch with a New One of the Same Model (Services Are Still Running)

Replacing the Only MPU on a Switch with a New One of the Same Model (Services Have Been Interrupted)

Replacing One of the MPUs on a Switch with a New One of the Same Model

Replacing an MPU with a New One of a Different Model

Replace an LPU

Replace a CSS Subcard

Replace an SFU

Replace a Power Module

Replace a Fan Module

Replace an Air Filter

Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000069522

Views: 29481

Downloads: 1154

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next