No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S7700 and S9700 Series Switches Hardware Installation and Maintenance Guide

This document describes hardware installation procedures of the S7700 and S9700 series switches, troubleshooting methods for common hardware faults, and switch maintenance instructions.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Switches Overview

Switches Overview

NOTE:
The figures in this document are for reference only.

S7700 Series

The S7700 series is available in S7703, S7703 PoE, S7706, S7706 PoE, and S7712. Figure 2-1 shows these chassis models.

Figure 2-1  S7703, S7703 PoE, S7706, S7706 PoE, and S7712 chassis

Table 2-1 lists the specifications of the S7700 series switches.

Table 2-1  Specifications of the S7700 series switches

Model

Height

W x D (Without Mounting Brackets)

Weight (Empty/Fully Loaded)

Maximum Power Consumption (Fully Loaded, Without PoE Power Supply)

S7703

175 mm (4 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 489 mm

10 kg/31.6 kg

1000 W

S7703 PoE

175 mm (4 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 489 mm

10.3 kg/33.8 kg

1000 W

S7706

441.7 mm (10 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 489 mm

15 kg/61.8 kg

2200 W

S7706 PoE

441.7 mm (10 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 489 mm

21.3 kg/78.1 kg

2200 W

S7712

663.95 mm (15 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 489 mm

25 kg/97 kg

4200 W

S9700 Series

The S9700 series is available in S9703, S9706, and S9712. Figure 2-2 shows these chassis models.

Figure 2-2  S9703, S9706, and S9712 chassis

Table 2-2 lists the specifications of the S9700 series switches.

Table 2-2  Specifications of the S9700 series switches

Model

Height

W x D (Without Mounting Brackets)

Weight (Empty/Fully Loaded)

Maximum Power Consumption (Fully Loaded)

S9703

175 mm (4 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 489 mm

11 kg/32.6 kg

1185 W

S9706

441.7 mm (10 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 489 mm

29 kg/75.8 kg

2640 W

S9712

663.95 mm (15 U)

  • With cable management frames: 442 mm x 585 mm
  • Without cable management frames: 442 mm x 489 mm

37 kg/116 kg

4906 W

Translation
Download
Updated: 2019-05-15

Document ID: EDOC1000069522

Views: 29626

Downloads: 1154

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next