No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S9300, S9300E, and S9300X Series Switches Hardware Installation and Component Replacement

This document describes hardware installation procedures of the S9300, S9300E, and S9300X series switches, troubleshooting methods for common hardware faults, and switch maintenance instructions.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Hardware Installation and Component Replacement (Infographics)

Hardware Installation and Component Replacement (Infographics)

This page provides infographics for switch hardware installation and component replacement.

Table 3-1 Infographics for hardware installation and component replacement
Content Link

Install Switch

Installation and Parts Replacement

Replacing the Only MPU on a Switch with a New One of the Same Model (Services Are Still Running)

Replacing One of the MPUs on a Switch with a New One of the Same Model

Replacing an MPU with a New One of a Different Model

Replace an LPU

Replace a CSS Subcard

Replace an SFU

Replace a Power Module

Replace a Fan Module

Replace an Air Filter

Updated: 2019-11-30

Document ID: EDOC1000069582

Views: 28344

Downloads: 463

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next