Indicator Status of a P25
The P25 indicators help you locate faults. By observing and recording the indicator status, you can know in which module the fault resides.
Front View
Rear View
1 |
Disk running indicator |
2 |
Disk alarm/location indicator |
3 |
System alarm indicator |
4 |
System location indicator |
5 |
IPMI management network port LNK indicator |
6 |
IPMI management network port ACT indicator |
7 |
Service network port LNK indicator |
8 |
Service network port active indicator |
9 |
Power running/alarm indicator |
- |
- |
Indicator Status
Location |
Indicator |
Color |
Status |
Description |
|---|---|---|---|---|
Chassis rear panel |
System alarm indicator |
Red |
On |
An alarm is generated. |
Red |
Blinking |
An alarm occurs on the power module. |
||
- |
Off |
The device is running properly. |
||
System location indicator |
Blue |
On |
The device is located. |
|
- |
Off |
The device is running properly. |
||
Chassis mounting ears |
System alarm indicator |
Red |
On |
An alarm is generated. |
Red |
Blinking |
An alarm occurs on the power module. |
||
- |
Off |
The device is running properly. |
||
System location indicator |
Blue |
On |
The device is located. |
|
- |
Off |
The device is running properly. |
||
System power indicator/Power button |
Green |
On |
The device is powered on. |
|
- |
Off |
The device is not powered on. |
||
Disk module |
Disk alarm/location indicator |
Blue |
On |
The disk is being located.a |
Red |
On |
An alarm is generated on the hard disk. |
||
- |
Off |
The hard disk is operating properly and not being located. |
||
Disk running indicator |
Green |
Blinking |
Data is being transferred. |
|
Green |
On |
No data is being transferred. |
||
Power module |
Power running/alarm indicator |
Green |
On |
The power module is operating properly. |
Green |
Blinking |
The AC power input is normal and the device is not powered on. |
||
Red |
On |
The power module is faulty. |
||
Red |
Blinking |
The AC input is in undervoltage or overvoltage protection. |
||
- |
Off |
No external power is input. |
||
Rear panel |
IPMI management network port LNK indicator |
Green |
On |
The link on the IPMI management network port is normal and the data transfer rate is 100 Mbit/s. |
- |
Off |
The link on the IPMI management network port is abnormal. |
||
IPMI management network port ACT indicator |
Yellow |
Blinking |
Data is being transferred. |
|
- |
Off |
No data is being transferred. |
||
Service network port LNK indicator |
Green |
On |
The data transfer rate between the device and application server is 1000 Mbit/s. |
|
Orange |
On |
The data transfer rate between the device and application server is 100 Mbit/s or 10 Mbit/s. |
||
- |
Off |
The link is abnormal. |
||
Service network port ACT indicator |
Yellow |
Blinking |
Data is being transferred. |
|
- |
Off |
No data is being transferred. |
||
| a: The management system sends a command for locating the hard disk. | ||||
Previous
