No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


WLAN Antenna Quick Start

This section describes key parameters and installation methods of antennas used on Huawei Access Points (APs).

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Antenna Description

Antenna Description

This document describes key parameters and installation methods of antennas used on Huawei Access Points (APs).

For easy description, the antennas are named according to the following rules.

Figure 1-1 Antenna naming rules





Antenna No.


Installation scenarios

  • Indoor: indoor scenarios
  • Outdoor: outdoor scenarios
  • Rail transportation: vehicle-ground communication scenarios
  • Vehicle-mounted: wireless coverage for train compartments scenarios


Frequency band

Besides the 2.4 GHz and 5 GHz frequency bands, some antennas can also work on other frequency bands. This section lists only the frequency bands used by Huawei APs.

  • 2.4 GHz
  • 5 GHz


Polarization mode

  • Single-polarized
  • Dual-polarized


Antenna type

  • Directional antenna
  • Omnidirectional antenna


Lobe width and gain (typical values)

  • H: horizontal lobe width
  • V: vertical lobe width
  • G: gain


Updated: 2019-12-25

Document ID: EDOC1000077015

Views: 153643

Downloads: 4257

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next