27012046 Technical Specifications
Appearance and Structure
Technical Specifications
Item | Details |
---|---|
Part Number | 27012046 |
Model | ANT5G14D3NW |
Description | Directional Antenna,5150~5850MHz,14dBi,30deg/30deg,N/Female,3port,with mounting parts,wall mounting |
Frequency [MHz] | 5150 MHz to 5850 MHz |
Antenna gain [dBi] | 14 dBi |
Coverage distance [m(ft.)] | 140 m(ft.) |
Horizontal beamwidth [degrees] | 30 degrees |
Vertical beamwidth [degrees] | 30 degrees |
Standing wave ratio (SWR) | ≤ 2 |
Polarization | Vertical polarization&Cross polarization |
Attenna connector | N-female x 3 |
Attenna dimensions [mm(in.)] | Diameter x Length: φ84 x 257 |
Weight without packaging [kg(lb)] | 1.22 kg(lb) |
Installation type | Wall |
Grounding requirements | Same as the AP |
Attenna note | The gains and lobe widths in this document are typical values. The actual values are within a range. For specifications, see the corresponding data sheets. There may be differences in the standards of different countries, so the mapping between antennas and APs shall comply with local standards. For details, refer to device access authentication information. The coverage distance is subject to the following constraints: - The default AP transmit power is 15 dBm. - The default STA type is mobile phone, and no obstacle exists. - 5 GHz: The uplink and downlink RSSIs are greater than or equal to -75 dBm. For any questions about the parameters above, contact Huawei technical support. |