Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Connecting RF Cables
RF Cable Connections
Connect three feeder ports A, B, and C of the antenna to radio interfaces A, B, and C of the corresponding frequency bands on the AP.
RF Cable Deployment Requirements
- Use a short RF cable to connect the antenna to an AP.
- It is recommended that you connect a 50 ohm RF load to an idle RF port.
- Bend radius requirements: RG-8U RF cable: > 150 mm; 1/2" RF cable: > 50 mm; 7/8" RF cable: > 250 mm. One inch (1") equals 25.4 mm.
- The grounding requirements of antennas are the same as those of APs.