Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Antenna Description
This document describes key parameters and installation methods of antennas used on Huawei Access Points (APs).
For easy description, the antennas are named according to the following rules.
Figure 1-1 Antenna naming rules
![]( "Click to enlarge")
No. |
Description |
Value |
|---|---|---|
1 |
Antenna No. |
– |
2 |
Installation scenarios |
|
3 |
Frequency band Besides the 2.4 GHz and 5 GHz frequency bands, some antennas can also work on other frequency bands. This section lists only the frequency bands used by Huawei APs. |
|
4 |
Polarization mode |
|
5 |
Antenna type |
|
6 |
Lobe width and gain (typical values)
|
- |