No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 18500, 18800, and 18800F Storage System V100R001C30 Remote Replication Feature Guide 09

This document describes the remote replication feature, in terms of the implementation principle, application scenario, configuration process, and reference information.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Adding a Remote Replication

Adding a Remote Replication

This operation enables you to add a remote replication pair to a consistency group. This ensures that the data of secondary resource of added pair is consistent with that of other pairs in the group at the same point in time.

Prerequisites

  • The properties of the remote replication to be added into the consistency group must be the same as the properties of the consistency group. The properties are Replication Mode, Synchronization Method, Interval, Speed, and Recovery Policy.
  • A remote replication can be added only when the Role of the consistency group is Primary.
  • The number of the remote replication in consistency group does not reach the maximum number of specifications.
  • If the consistency group is empty (no remote replication pair), the remote replication is split.
  • If the consistency group is not empty (with remote replication pair(s)), the consistency group and the remote replication are both split.

Precautions

  • Only the remote replication that has the same replication mode as the consistency group can be added to the consistency group.
  • A remote replication whose state is Normal, Synchronizing, Interrupted, Invalid, To Be Recovered, or Unknown cannot be added to a consistency group.

Procedure

  1. Go to the dialog box for adding a remote replication.
    1. On the right navigation bar, click .

      The data protection page is displayed.

    2. In the left function pane, click Remote Replication.
    3. Click the Remote Replication Consistency Group tab.

      The consistency group management page is displayed.

    4. Right-click a consistency group to which you want to add a remote replication and choose Add Remote Replication

      The Add Remote Replication Pairs dialog box is displayed.

  2. From the Available Remote Replications Pairs list, select a remote replication and click Right Arrow to add it.

    NOTE:

    Please select the remote device first, when there is no remote replication from the Available Remote Replications Pairs list.

  3. Confirm the operation.
    1. Click OK.

      The Results message box is displayed, indicating that the operation succeeded.

    2. Click Close.
Download
Updated: 2019-01-28

Document ID: EDOC1000077758

Views: 9869

Downloads: 65

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next