No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 18500, 18800, and 18800F Storage System V100R001C30 Remote Replication Feature Guide 09

This document describes the remote replication feature, in terms of the implementation principle, application scenario, configuration process, and reference information.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Data Recovery

Data Recovery

After the primary site of a remote replication session fails, the secondary temporarily takes over services of the primary site. When the primary recovers, services are switched back to the primary site. This section describes how the storage system recovers from a site failure. This section will help you with remote replication configuration, site recovery, and fault analysis in disaster recovery scenarios.

When the primary site recovers from a disaster, it is required to rebuild a remote replication between primary and secondary storage systems. And you can use the data on the secondary site to recover the primary site. Figure 1-5 shows how the storage system recovers data at the primary site after a disaster.
Figure 1-5  Process of recovering data at the primary site after a disaster

NOTE:

In an asynchronous remote replication scenario, the storage system performs data synchronization multiple times until the data difference between the primary and secondary LUN is comparatively small. Then, the storage system stops services and performs the last synchronization. This prevents data loss and minimizes the downtime.

Download
Updated: 2019-01-28

Document ID: EDOC1000077758

Views: 11004

Downloads: 65

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next