No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 18500, 18800, and 18800F Storage System V100R001C30 Remote Replication Feature Guide 09

This document describes the remote replication feature, in terms of the implementation principle, application scenario, configuration process, and reference information.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Setting Device Information

Setting Device Information

This operation enables you to set device name and physical location of the device.

Procedure

  1. Go to the Basic Information management page.
    1. On the right navigation bar, click .
    2. In the Viewing and Settings area, click Basic Information.

      The Basic Information page is displayed.

  2. Set the device information.
    1. Select the Device Information node.
    2. Set Device Name and Device Location.
  3. Confirm the configuration of basic information about storage devices.
    1. Click Save.

      The Execution Result dialog box is displayed, indicating that the operation succeeded.

    2. Click Close.
Download
Updated: 2019-01-28

Document ID: EDOC1000077758

Views: 9800

Downloads: 65

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next