No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

OceanStor 18500, 18800, and 18800F Storage System V100R001C30 Remote Replication Feature Guide 09

This document describes the remote replication feature, in terms of the implementation principle, application scenario, configuration process, and reference information.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Operation (Using the LUN Copy Feature of the Production and DR Centers)

Configuration Operation (Using the LUN Copy Feature of the Production and DR Centers)

You can create a LUN copy on the storage system of the production center and DR center to implement initial synchronization for a remote replication.

Prerequisites

  • The production center and the DR center have network established, remote storage systems configured, and the primary and secondary LUNs created.
  • A LUN has been created on the external storage system. This LUN has the same capacity as the primary and secondary LUNs of the remote replication.
  • The external storage system is in the production center and connected to the storage system of the production center. The remote storage system has been configured in the production center.
  • The external storage system is a Huawei product.
  • The production center supports the snapshot feature and both the production center and the DR center support the LUN copy feature.

Procedure

  1. Configure the remote replication from the production center to the DR center.
    1. Log in to the storage system of the production center and create a remote replication. The primary LUN of the remote replication is the LUN of the production center and the secondary LUN is the LUN of the DR center.

      The remote replication is created from the production center to the DR center and its Pair Health Status is Normal.

      NOTE:

      When creating remote replication, select The primary and secondary LUNs have consistent data and data synchronization is not required.

    2. Split the remote replication from the production center to the DR center.

      The remote replication is split from the production center to the DR center and its Pair Running Status is Split.

  2. Replicate data from the production center to the external storage system.
    1. Create and activate a snapshot for the primary LUN of the production center.

      The snapshot is created and activated.

    2. Log in to the external storage system and create a full LUN copy. The source LUN of the LUN copy is the snapshot for the storage system of the production center and the target LUN is the LUN of the external storage system.

      The full LUN copy is created and its Health Status is Normal.

    3. Start the full LUN copy.

      The full LUN copy is started and its Running Status is Copying. After the full LUN copy is complete, its Running Status becomes Completed.

    4. Delete the full LUN copy.

      The full LUN copy is deleted.

    5. Log in to the storage system of the production center and deactivate and delete the snapshot.

      The snapshot is deactivated and deleted.

  3. Move the external storage system to the DR center.
  4. Recover data from the external storage system to the storage system of the DR center.
    1. Log in to the storage system of the DR center and create a full LUN copy. The source LUN of the LUN copy is the LUN of the external storage system and the target LUN is the secondary LUN of the remote replication. Then start the LUN copy.

      The full LUN copy is created and started. After the full LUN copy is complete, its Running Status becomes Completed.

      NOTE:
      • Create this LUN copy in developer mode and use command parameter is_target_lun_check=no.
      • Ensure that the remote replication secondary LUN is in the Read-only state during LUN copy and LUN copy configuration.

    2. Delete the full LUN copy.
  5. Start the remote replication from the production center to the DR center.
Download
Updated: 2019-01-28

Document ID: EDOC1000077758

Views: 10649

Downloads: 65

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next