No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TP48200A-DT19D1 Outdoor Power System User Manual

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Replacing an SMU

Replacing an SMU

Prerequisites

  • The cabinet door key is available.

  • The new SMU is intact.

Procedure

  1. Push the locking latch towards the left.
  2. Pull the handle outwards and remove the SMU, as shown in Figure 4-3.

    Figure 4-3  Removing an SMU

  3. Insert the new SMU into the subrack, push the locking latch towards the left, and pull out the handle.
  4. Slide the SMU into the subrack slowly along the guide rails, push in the handle, and then push the locking latch towards the right.
  5. Reset the parameters on the SMU.

    Figure 4-4  Installing an SMU

Follow-up Procedure

Pack the removed component and send it to the local Huawei warehouse.

Download
Updated: 2019-03-05

Document ID: EDOC1000078784

Views: 16184

Downloads: 437

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next