No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TP48200A-DT19D1 Telecom Power User Manual

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Associations Between Alarms and Dry Contacts on the UIM

Associations Between Alarms and Dry Contacts on the UIM

Table C-1 Associations between dry contacts and alarms

Dry Contact Type

Silkscreen

Associated Alarm

Dry contact inputs

DIN1

Dry contact input 1

DIN2

Dry contact input 2

DIN3

Dry contact input 3

DIN4

Dry contact input 4

DIN5

Heater fault alarm

Air conditioner fault alarm

DIN6

Dry contact input 6

Dry contact outputs

The default setting (closed: alarm; open: normal) can be modified.

ALM1

Mains failure

ALM2

DC over/undervoltage

ALM3

Rectifier faults

ALM4

AC or DC SPD faults

ALM5

Load fuse blown, battery fuse blown, or loop disconnection

ALM6

Battery over/undertemperature

ALM7

Door status alarm

ALM8

Heater/Air conditioner/Fan fault alarm

Download
Updated: 2019-11-27

Document ID: EDOC1000078784

Views: 24447

Downloads: 504

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Share
Previous Next