No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


TP48200A-DT19D1 Telecom Power User Manual

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Rect Fault

Rect Fault

Possible Causes

  • Rectifier connections are loose.
  • A rectifier is faulty.


  1. Check the Fault indicator on the rectifier panel. If it is steady red, remove the rectifier, and then reinstall it after the indicator turns off.
  2. If the alarm persists, replace the rectifier.
Updated: 2019-11-27

Document ID: EDOC1000078784

Views: 24205

Downloads: 499

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next