No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

TP48200A-DT19D1 Outdoor Power System User Manual

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Batt Chg. Overcur.

Batt Chg. Overcur.

Possible Causes

  • Rectifier communication is interrupted.
  • SMU connections are loose.
  • The SMU is faulty.

Measures

  1. Check whether an alarm has been generated for interrupted rectifier communication. If so, remove the rectifier, reinstall it, and check whether the alarm is cleared. If the alarm still exists, replace the rectifier.
  2. Remove the SMU, reinstall it, and check whether the alarm is cleared. If the alarm still exists, replace the SMU.
Download
Updated: 2019-03-05

Document ID: EDOC1000078784

Views: 15697

Downloads: 429

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next