No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


TP48200A-DT19D1 Telecom Power User Manual

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Water Alarm

Water Alarm

This alarm is generated only for the power system that has a water sensor installed.

Possible Causes

  • There is water inside the cabinet.
  • The water sensor is faulty.


  1. Check whether there is water inside the cabinet. If so, remove the water with dry cotton or other tools and then locate and rectify the fault.
  2. Check whether the water sensor is faulty. If the water sensor is faulty, replace it.
Updated: 2019-11-27

Document ID: EDOC1000078784

Views: 24782

Downloads: 505

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next